Print This Page
Supplier & Distributor of Paint Spray Guns
(click on thumbnail to enlarge)
Supplier & Distributor of Paint Spray Guns
Norris-Wiener/Bay State Spray Equipment has been offering wide varieties of fine paint spray guns to our customers in New York and New England since 1948. One of the many we distribute is the Binks Model 2100 conventional spray gun. This paint gun has corrosion resistant SS fluid passages, an air control valve inside our ergonomic handle, and will spray all conventional coatings, including high solids. We also carry the Compact HVLP (Blue) Gravity Feed model from DeVilbiss. Built to provide outstanding coating atomization, this product maintains EPA compliance while producing superior finish performance.
To learn more about these and the many other paint spray guns we distribute, please contact Norris-Wiener directly.
Binks Paint Spray Guns
Binks Conventional Air Spray Gravity Gun
Description:
The Binks Trophy Series Spray Guns are designed to provide superior finishes in the industrial marketplace. The Trophy Series Spray Guns feature the rugged construction and dependability that you expect from the Binks brand. The ergonomic design will fit your hand comfortably. The optimized air flow through the gun improves atomization for maximum transfer efficiency and finish quality with a wide variety of materials. With the right Binks Trophy Series set up, you will be able to spray any material from stain to zinc.
Click here for Service Info
Click here for Sales Info
Click here for Compatibility Chart
Click her for gun extensions info
Binks Conventional Air Spray Pressure Gun
Description:
The Binks Trophy Series Spray Guns are designed to provide superior finishes in the industrial marketplace. The Trophy Series Spray Guns feature the rugged construction and dependability that you expect from the Binks brand. The ergonomic design will fit your hand comfortably. The optimized air flow through the gun improves atomization for maximum transfer efficiency and finish quality with a wide variety of materials. With the right Binks Trophy Series set up, you will be able to spray any material from stain to zinc.
Click here for Service Info
Click here for Sales Info
Click here for Compatibility Chart
Binks Conventional Air Spray Siphon Gun
Description:
The Binks Trophy Series Spray Guns are designed to provide superior finishes in the industrial marketplace. The Trophy Series Spray Guns feature the rugged construction and dependability that you expect from the Binks brand. The ergonomic design will fit your hand comfortably. The optimized air flow through the gun improves atomization for maximum transfer efficiency and finish quality with a wide variety of materials. With the right Binks Trophy Series set up, you will be able to spray any material from stain to zinc.
Click here for Service Info
Click here for Sales Info
Click here for Compatibility Chart
Binks Conventional Model 2100 Spray Gun w/ Hose & 2 Quart Pressure Cup
Description:
2100 Conventional Spray Gun, Hoses, includes:
2 Quart Regulated Pressure Cup
5' Air Hose Assembly
5' Fluid Hose Assembly
Detail:
Name: 2100 Spray Gun, Hoses and 2 quart pressure cup
Part Number: 98-1067
Gun: Model 2100-2800-7
Cup: 80-295
Hose: KB-4006
Binks Conventional Model 2100 Spray Gun
Description:
The Binks 2100 spray gun is a durable, full sized gun that is comfortable, well balanced, and easy to use. A specially designed grip measurably improves operator control, balance, and spray quality. Supported by the largest selection of air and fluid nozzles in the industry, the model 2100 will spray all conventional coatings, including those with high solids.
Name: 2100
Part Number:2100-0000-0
Gun Category:Conventional
Gun Type:Manual
Fluid Passages: Stainless Steel
Fluid Inlet:3/8" NPS
Air Inlet: 1/4" NPS
Construction: Forged Aluminum
Binks Trophy HVLP Pressure Spray Gun
Description:
The Binks Trophy Series Spray Guns are designed to provide superior finishes in the industrial marketplace. The Trophy Series Spray Guns feature the rugged construction and dependability that you expect from the Binks brand. Our designers have emphasized ergonomics and optimized air flow through the guns to improve atomization for maximum transfer efficiency and finish quality. With the right Binks Trophy Series set up, you will be able to spray any material from stain to zinc.
Click
here for Service Info
Click
here for Sales Info
Click here for Compatibility Chart
Click here for Gun Extension Info
Binks Trophy HVLP Siphon Spray Gun
Description:
The Binks Trophy Series Spray Guns are designed to provide superior finishes in the industrial marketplace. The Trophy Series Spray Guns feature the rugged construction and dependability that you expect from the Binks brand. Our designers have emphasized ergonomics and optimized air flow through the guns to improve atomization for maximum transfer efficiency and finish quality with a wide variety of materials. With the right Binks Trophy Series set up, you will be able to spray any material from stain to zinc.
Click
here for Service Info
Click
here for Sales Info
Click here for Compatibility Chart
Binks Trophy HVLP Gravity Spray Gun
Description:
The Binks Trophy Series Spray Guns are designed to provide superior finishes in the industrial marketplace. The Trophy Series Spray Guns feature the rugged construction and dependability that you expect from the Binks brand. Our designers have emphasized ergonomics and optimized air flow through the guns to improve atomization for maximum transfer efficiency and finish quality with a wide variety of materials. With the right Binks Trophy Series set up, you will be able to spray any material from stain to zinc.
Click
here for Service Info
Click
here for Sales Info
Click here for Compatibility Chart
Binks Trophy LVMP Pressure Feed Spray Gun
Description:
LVMP has the same or better transfer efficiency and higher air pressure when compared to HVLP, with a finish similar to conventional spray. The Binks Trophy Series Spray Guns are designed to provide superior finishes in the industrial marketplace. The Trophy Series Spray Guns feature the rugged construction and dependability that you expect from the Binks brand. Our designers have emphasized ergonomics and optimized air flow through the guns to improve atomization for maximum transfer efficiency and finish quality. With the right Binks Trophy Series set up, you will be able to spray any material from stain to zinc.
Click
here for Service Info
Click
here for Sales Info
Click here for Compatibility Chart
Click Here For Gun Extensions
Binks Trophy LVLP Gravity Spray Gun
Description:
The Binks Trophy Series Spray Guns are designed to provide superior finishes in the industrial marketplace. The Trophy Series Spray Guns feature the rugged construction and dependability that you expect from the Binks brand. Our designers have emphasized ergonomics and optimized air flow through the guns to improve atomization for maximum transfer efficiency and finish quality with a wide variety of materials. With the right Binks Trophy Series set up, you will be able to spray any material from stain to zinc.
Click
here for Service Info
Click
here for Sales Info
Click here for Compatibility Chart
Binks Trophy LVLP Siphon Spray Gun
Description:
The Binks Trophy Series Spray Guns are designed to provide superior finishes in the industrial marketplace. The Trophy Series Spray Guns feature the rugged construction and dependability that you expect from the Binks brand. Our designers have emphasized ergonomics and optimized air flow through the guns to improve atomization for maximum transfer efficiency and finish quality with a wide variety of materials. With the right Binks Trophy Series set up, you will be able to spray any material from stain to zinc.
Click here for Service Info
Click here for Sales Info
Click here for Compatibility Chart
Binks Air Assist AA1600 M Manual Spray Gun
Description:
Air Assist Airless provides fast application of materials, a soft spray that reduces overspray, and the ability to penetrate into recesses and cavities. This is especially important in the wood industry where intricate shapes require a fine finish. The pattern is formed by the spray tip and air is used to eliminate tails and adjust the shape.
The AA1600M improves fan pattern adjustment for hard-to-reach areas and reduces build-up of acid catalyzed coatings. These features are particularly beneficial in the wood finishing industries, such as cabinet shops and furniture manufacturers, where recessed and hard-to-reach spaces require special attention to attain an even and thorough finish.
Details
Name: AA1600M
Part Number: 0909-1600-xxxxxx
Gun Category: HVLP
Gun Type: AA Airless
Air Cap: User selects, Flat / Twist HVLP or Flat / Twist LVMP Air Cap Kit
Manual Fluid Passages: Stainless Steel
Fluid Inlets: 1/4" NPS (m)
Max. Pressure: 1600 PSI / 110 Bar
Air Inlet: 1/4" NPS (M) or 3/8" O.D. Tube
CFM: 7
Weight: 17.28 oz. / 490g
Construction: Drop-Forged Aluminum
Repair Kits: 54-5825
Colors: Red
Binks Air Assist AA4400M Manual Spray Gun
Description:
The Binks AA4400M improves fan pattern adjustment for hard-to-reach areas and reduces build-up of acid catalyzed coatings. The tungsten carbide seat works great for high viscosity fluids and heavy industrial applications. These features are particularly beneficial in the wood finishing industries, such as cabinet shops and furniture manufacturers, where recessed and hard-to-reach spaces require special attention to attain an even and thorough finish.
Details
Name: AA4400M
Part Number: 0909-4400-xxxxxx
Gun Category: HVLP
Gun Type: AA Airless Manual
Air Cap: AA10HP
Fluid Passages: Stainless Steel / Tungsten Carbide
Fluid Inlets: 1/4” NPS (m)
Max. Pressure: 4400 PSI / 303 Bar
Air Inlet: 1/4" NPS
CFM: 7
Weight: 17.42 oz. / 494g
Construction: Drop-Forged Aluminum
Repair Kits: 54-5826
Colors: Orange
DeVilbiss Paint Spray Guns
DeVilbiss Conventional AGX Automatic Spray Guns
Description:
Built to withstand the rigors of high-speed production lines and harsh finishing conditions, the AGX automatic air spray gun is engineered for rugged reliability. Designed for use with industrial robots, reciprocators and stationary mounting, the AGX spray gun's compact size allows mounting in tight areas. Simplified gun design for greater reliability and ease of maintenance. Detachable spray head for fast needle packing replacement.
Technical Specifications:
Name: AGX Automatic Spray Gun
Models: AGX-xxx-x (user selects - see tables below)
Construction: Machined aluminum
Weight: 26 oz (728 gr) without mounting stud, 30.5 oz (854 gr) with mounting stud
Air Inlet: 1/4" NPS (M)
Fluid Inlet: 3/8" NPS (M)
Fluid Passages: 300 grade stainless steel
Feed Type: Pressure feed
Gun Repair Kit: KK-4992-1
- Model No. (Avail. tip sizes)
- Typical Applications
- FluidTip/Needle Construction
- AGX-550 (AC, D, E, FF, FX, G)
- Most conventional materials and most waterborne and chlorinated solvents.
- 400 Gr. Stainless
300 Gr. Stainless
- AGX-551 (D, EE, FF)
- Abrasive materials (i.e. porcelain enamel, ceramic glazes, buffing compounds) and/or water mix materials. Includes abrasive seal.
- Carboloy, 400 Gr. Stainless
- AGX-553 (E, FF, FX)
- Waterborne and more corrosive materials (below 7 pH)
- 303 Gr. Stainless w/ U.H.M.W. poly. insert)
- Tip
- Size
- AC
- .110" (2.8 mm)
- D
- .110" (2.8 mm)
- E
- .070" (1.8 mm)
- EE
- .070" (1.8 mm)
- FF
- .050" (1.4 mm)
- FX
- .042" (1.1 mm)
- G
- .028" (.7 mm)
DeVilbiss Conventional Compact Automatic I Spray Gun
Description:
The DeVilbiss Compact Automatic "I" has the following features:
- Wide range of air caps
- Removable stainless steel spray head for fast and easy maintenance
- Control of spray performance and fluid flow is unequalled with the fluid adjusting knob
- Stainless steel passages (for waterborne and solvent based materials)
- Independent fan, atomizing and triggering air, vital for robotic and automatic spray machine applications
- Indexing air cap for consistent reproduction of spray pattern
Technical Specifications:
Name: Compact Automatic Conventional Spray Gun
Model: CMAI-xxx-xxx Compact Automatic "I" (user selects)
Fluid Inlet & Recirculation: 1/4" BSPP (F)
Air Inlet (atomization & fan): 1/4" BSPP (F)
Max. Temperature in Use: 104°F (40°C)
Gun Weight: 2.0 lbs. or 950 gms
Construction: Aluminum hard anodized
Tip / Needle / Sprayhead: 303 gr. stainless steel
- Air Cap Number
- 430
- 443
- 497
- 500R
- Spray Gun Type
- Automatic
- Automatic
- Automatic
- Automatic
- Fluid Tip Dia. in/mm
- .039 (1.0mm)
- LM
- LM
- LM
- LM
- Fluid Tip Dia. in/mm
- .055 (1.4mm)
- M
- M
- M
- M
- Fluid Tip Dia. in/mm
- .070 (1.8 mm)
- M, H
- M, H
- M, H
- M, H
- Fluid Tip Dia. in/mm
- .086 (2.2mm)
- M
- M
- M
- M
- Pressure, Siphon or Gravity Feed
- S, P, G
- P
- P
- P
- P
L - Low Viscosity (20 sec. Zahn 2 and Lower) M - Medium Viscosity (31-45 sec. Zahn 2)
LM - Low to Medium Viscosity (21-30 sec. Zahn 2) H - High Viscosity (46 sec. Zahn 2 and Higher)
Click here for Service Info
Click here for Sales Info
Standard Set-Ups Available for Compact-I Automatic Spray Gun
- PART NUMBER
- DESCRIPTON
- TRANS-TECH GUNS
- CMAI-G05-590
- Compact Auto-I with .55 mm tip, with 590 air cap
- CMAI-G85
- Compact Auto-I, Gravity, with .95 mm tip, no air cap
- CMAI-G85P
- Compact Auto-I, .85 mm plastic needle, no air cap
- CMAI-G14P
- Compact Auto-I, 1.4 mm plastic needle, no air cap
- CONVENTIONAL GUNS
- CMAI-10
- Compact Auto-I, 1.0 mm tip, no air cap
- CMAI-14
- Compact Auto-I, 1.4 mm tip, no air cap
- CMAI-22
- Compact Auto-I, 2.2 mm tip, no air cap
- CMAI-14P
- Compact Auto-I, 1.4 mm plastic needle, no air cap
DeVilbiss Conventional Compact Automatic "X" Spray Gun
Description:
The DeVilbiss Compact Automatic "X" has all the features of the Compact Automatic "I" plus fast and easy removal from the mounting block:
- No tools required for detachment
- Recirculating and non-recirculating gun head - all in one
- Fixed gun positioning
- Small foot print
Technical Specifications:
Name: Compact Automatic X Conventional Spray Gun
Model: CMAX-xxx Compact Automatic "X" (user selects)
Fluid Inlet: 1/8" BSPP (F)
Air Inlet: 1/8" BSPP (F)
Max. Temperature in Use: 104°F (40°C)
Gun Weight: 950 gms or 2.0 lbs
Construction: Aluminum hard anodized
Tip / Needle / Sprayhead: 303 gr. stainless steel
- Air Cap Number
- 430
- 443
- 497
- 500R
- Spray Gun Type
- Automatic
- Automatic
- Automatic
- Automatic
- Fluid Tip Dia. in/mm
- .039 (1.0mm)
- LM
- LM
- LM
- LM
- Fluid Tip Dia. in/mm
- .055 (1.4mm)
- M
- M
- M
- M
- Fluid Tip Dia. in/mm
- .070 (1.8 mm)
- M, H
- M, H
- M, H
- M, H
- Fluid Tip Dia. in/mm
- .086 (2.2mm)
- M
- M
- M
- M
- Pressure, Siphon or Gravity Feed
- S, P, G
- P
- P
- P
- P
L - Low Viscosity (20 sec. Zahn 2 and Lower) M - Medium Viscosity (31-45 sec. Zahn 2)
LM - Low to Medium Viscosity (21-30 sec. Zahn 2) H - High Viscosity (46 sec. Zahn 2 and Higher)
Click Here For Service Information - Compact Automatic "X"
Click Here For Sales Information
Standard Set-Ups Available for Compact-I Automatic Spray Gun
- PART NUMBER
- DESCRIPTON
- TRANS-TECH GUNS
- CMAI-G05-590
- Compact Auto-I with .55 mm tip, with 590 air cap
- CMAI-G85
- Compact Auto-I, Gravity, with .95 mm tip, no air cap
- CMAI-G85P
- Compact Auto-I, .85 mm plastic needle, no air cap
- CMAI-G14P
- Compact Auto-I, 1.4 mm plastic needle, no air cap
- CONVENTIONAL GUNS
- CMAI-10
- Compact Auto-I, 1.0 mm tip, no air cap
- CMAI-14
- Compact Auto-I, 1.4 mm tip, no air cap
- CMAI-22
- Compact Auto-I, 2.2 mm tip, no air cap
- CMAI-14P
- Compact Auto-I, 1.4 mm plastic needle, no air cap
DeVilbiss Compact Gravity Feed Spray Gun
Description:
Gravity feed guns offer quick color changes and convenience on small jobs or touch-up applications. Gravity guns are able to use all of the coating - reducing waste. DeVilbiss Compact gravity guns are designed for superior finish performance, built for ergonomic comfort, outperforms the competition, tested and approved worldwide.
- No tools required for detachment
- Recirculating and non-recirculating gun head - all in one
- Fixed gun positioning
- Small foot print
Technical Specifications:
Name: Compact Gravity
Model: COM-G430-xx-xx (user selects, see Models tab)
Gun Category: Conventional
Gun Type: Manual
Fluid Passages: Aluminum
Fluid Inlet: 3/8" Universal Thread
Air Inlet: 1/4" Universal Thread
Weight: 14.1 oz. (400g) gun only
Construction: Drop Forged Aluminum
Feed Type: Gravity
Color: Silver
- Air Cap Number
- 430
- Spray Gun Type
- Manual
- Fluid Tip Dia. in/mm
- .055 (1.4 mm)
- M
- Fluid Tip Dia. in/mm
- .070 (1.8mm)
- M, H
M - Medium Viscosity (31-45 sec. Zahn 2)
H - High Viscosity (46 sec. Zahn 2 and Higher)
Click Here For Service Information - Compact Automatic "X"
Click Here For Sales Information
Standard Set-Ups Available for Compact-I Automatic Spray Gun
- PART NUMBER
- DESCRIPTON
- TRANS-TECH GUNS
- CMAI-G05-590
- Compact Auto-I with .55 mm tip, with 590 air cap
- CMAI-G85
- Compact Auto-I, Gravity, with .95 mm tip, no air cap
- CMAI-G85P
- Compact Auto-I, .85 mm plastic needle, no air cap
- CMAI-G14P
- Compact Auto-I, 1.4 mm plastic needle, no air cap
- CONVENTIONAL GUNS
- CMAI-10
- Compact Auto-I, 1.0 mm tip, no air cap
- CMAI-14
- Compact Auto-I, 1.4 mm tip, no air cap
- CMAI-22
- Compact Auto-I, 2.2 mm tip, no air cap
- CMAI-14P
- Compact Auto-I, 1.4 mm plastic needle, no air cap
DeVilbiss Compact Pressure Feed Spray Gun
Description:
This fluid delivery option (pressure feed) delivers higher volumes of fluids than other gun set ups, and will spray a wider range of materials. It also enables independent control of fluid pressures. Designed for superior finish performance, built for ergonomic comfort, outperforms the competition, tested and approved worldwide.
Technical Specifications:
Name: Compact Pressure Feed
Models: COM-PS-xxx-xx-xx (user selects, see below - 3 Air Caps to choose from)
Gun Category: Conventional
Gun Type: Manual
Fluid Passages: Stainless Steel
Air Inlet: 1/4" Universal Thread
Fluid Inlet: 3/8" Universal Thread
Weight: 14.6 oz. (412g) gun only
Construction: Drop Forged Aluminum
Color: Silver
- Air Cap Number
- 430
- 443
- 497
- Spray Gun Type
- Manual & Automatic
- Manual & Automatic
- Manual & Automatic
- Fluid Tip Dia. in/mm
- .039 (1.0mm)
- LM
- LM
- LM
- Fluid Tip Dia. in/mm
- .055 (1.4mm)
- M
- M
- M
- Fluid Tip Dia. in/mm
- .070 (1.8 mm)
- M, H
- M, H
- M, H
- Fluid Tip Dia. in/mm
- .086 (2.2mm)
- M
- M
- M
- Tip
- Size
- AC
- .110" (2.8 mm)
- D
- .110" (2.8 mm)
- E
- .070" (1.8 mm)
- EE
- .070" (1.8 mm)
- FF
- .050" (1.4 mm)
- FX
- .042" (1.1 mm)
- G
- .028" (.7 mm)
L - Low Viscosity (20 sec. Zahn 2 and Lower) M - Medium Viscosity (31-45 sec. Zahn 2)
LM - Low to Medium Viscosity (21-30 sec. Zahn 2) H - High Viscosity (46 sec. Zahn 2 and Higher)
DeVilbiss Compact Siphon Feed Spray Gun
Description:
The Siphon-Feed hookups (external atomization) use vacuum created at the nozzle to draw fluid from a cup. Designed for superior finish performance, built for ergonomic comfort, outperforms the competition, tested and approved worldwide.
Technical Specifications:
Name: Compact Siphon
Model: COM-PS430-xx-xx (user selects)
Gun Category: Conventional
Fluid Passages: Stainless Steel
Fluid Inlet: 3/8" NPS (M)
Air Inlet: 1/4" NPS (M)
Weight: 14.6 oz. (412g) gun only
Construction: Drop Forged Aluminum
Color: Silver
- Air Cap Number
- 430
- Spray Gun Type
- Manual
- Fluid Tip Dia. in/mm
- .070 (1.8 mm)
- M, H
- Fluid Tip Dia. in/mm
- .086 (2.2 mm)
- H
M - Medium Viscosity (31-45 sec. Zahn 2)
H - High Viscosity (46 sec. Zahn 2 and Higher)
DeVilbiss Conventional EGA Touch-Up Spray Gun
Description:
The gun of choice for touch-up, shading, edging and detail decorating, the EGA touch-up gun provides precise control for any type of delicate spray finishing applications. The gun features a forefinger trigger to enhance operator control, and a long needle taper to make detail work easy. Equipped with stainless steel tip and needle.
Technical Specifications:
Name: EGA Touch-Up Conventional
Model: EGA-503-390F
Fluid Inlet: 1/4" NPS (M)
Fluid Passages: Aluminum
Air Inlet: 1/4" NPS (M)
Max. Temperature in Use: 104°F (40°C)
Weight: 7 oz (196 gr)
Feed Type: Pressure feed, Suction feed
Construction: Drop forged aluminum
Optional Cups: 8 oz. Cup (TGS-503) polyethylene, KB-555 2 qt. aluminum cup and KB-545-SS, 2 qt. stainless steel cup
Gun Repair Kit: KK-5044
DeVilbiss FLG4 FinishLine Gravity Feed Spray Gun
Description:
Durable, high quality construction and precision engineered to produce well-atomized uniform spray patterns. Stainless steel fluid tip and needle. This model comes equipped with the DeKups™ Disposable Cup System.
Technical Specifications:
Name: FinishLine FLG4 Gravity Feed
Model: FLG-CNG-115
Gun Category: Conventional
Gun Type: Manual
Fluid Passages: Anodized Aluminum
Fluid Inlet: 3/8" NPS female
Air Inlet: 1/4" NPS male
Weight: 23.32 oz./661 g w/cup
Construction: Forged Aluminum
Feed Type: Gravity Feed
Cup: 24 oz. DeKups Disposble Cup
Gun Repair Kit: FLG4-488-K
Click here for Service Information - English
Click Here For Sales Information
DeVilbiss FinishLine FLG4 Siphon Feed Spray Gun
Description:
The FLG4 gun works with a wide variety of coatings to provide a professional, fine, factory finish. Waterborne compatible, all parts are anodized aluminum & stainless steel. Siphon model features DeKups™ disposable cup system. Air caps & nozzles provide a high quality finish; ergonomic handle reduces stress.
Technical Specifications:
Name: FinishLine FLG4
Model: FLG-CNS-115
Gun Category: Conventional
Gun Type: Manual
Fluid Passages: Anodized Aluminum
Fluid Inlet: 3/8" NPS male
Air Inlet: 1/4" NPS male
Weight: 26.73 oz./758 g w/cup
Construction: Forged Aluminum
Feed Type: Siphon Feed
Cup: 24 oz. DeKups Disposable Cup
Click here for Service Information - English
Click here for Service Information - Spanish
Click Here For Sales Information
DeVilbiss FLG-MGQ-700-FL Pressure Feed Spray Gun
Description:
MGQ is our value-priced gun! Used where good atomization is required, it is good for wood trim, shutters, wood decks, and more. Great for D-I-Y use or occasional jobs. Can be used with many different types of coating applications such as stains and latexes. Key features include:
- Siphon gun
- Cup lid is built into the gun
- Internal mix air nozzle provided
- Good quality construction at an economical price
Technical Specifications:
Name: FinishLine Pressure Feed
Model: FLG-MGQ-700-FL
Gun Category: Conventional
Gun Type: Manual
Fluid Passages: Aluminum
Fluid Inlet: 3/8" BSP(F)
Air Inlet: 1/4" NPS (M)
Weight: 21.4 oz. (608 g) w/cup
SCFM at 30 psi: 2.6
Construction: Aluminum
Feed Type: Siphon Feed
DeVilbiss JGA-510 Manual Spray Gun (Standard size body)
Description:
Setting industry standards for high-production performance, the JGA manual spray gun also offers the comfortable fit and feel operators prefer. An economical option for waterborne and solvent-based material applications, the JGA air spray gun delivers the quality results you need for tough applications.
Technical Specifications:
Name: JGA Standard Size Manual Spray Gun
Model: JGA-510-xxxx (user selects)
Gun Category: Conventional
Gun Type: Manual
Fluid Passages: 300 grade stainless steel
Fluid Inlet: 3/8" NPS (M)
Air Inlet: 1/4" NPS (M)
Weight: 21.6 oz. (613 gr)
Construction: Drop forged aluminum
Feed Type: Pressure feed, Suction feed (EX)
Gun Repair Kit: KK-4987-2
DeVilbiss MBC-510 Manual Air Spray Gun with Removable Head
Description:
Combining a drop forged aluminum body with a forged removable spray head, the MBC-510 spray gun is ideal for applications that require maximum output and quick changeovers. Removable spray head allows for reduced downtime on nozzle combination changeovers. MBC spray guns have nickel-plated brass fluid passages and 400-grade stainless steel fluid tip and needle.
Technical Specifications:
Name: MBC Conventional
Model: MBC-510-xxxxx (user selects, see models below)
Gun Category: Conventional
Gun Type: Manual
Fluid Passages: Nickel-plated brass
Fluid Inlet: 3/8" NPS (M)
Air Inlet: 1/4" NPS (M)
Weight: 27 oz (768 gr) with air cap and ring
Construction: Drop forged aluminum
Feed Type: Pressure feed, Suction feed (EX)
Applications include oil platforms, corrosion control and bridge maintenance coatings
Models: MBC-510-30EX
MBC-510-64HDD
MBC-510-64HDE
MBC-510-704E
Gun Repair Kit: KK-4058-1
Click here for Service Information
Click Here For Sales Information
DeVilbiss HVLP AGX Automatic Spray Guns
Description:
Built to withstand the rigors of high-speed production lines and harsh finishing conditions, the AGX automatic air spray gun is engineered for rugged reliability. Designed for use with industrial robots, reciprocators and stationary mounting, the AGX spray gun's compact size allows mounting in tight areas. Simplified gun design for greater reliability and ease of maintenance. Detachable spray head for fast needle packing replacement.
Technical Specifications:
Name: AGX Automaitc Spray Gun
Models: AGX-xxx-x (user selects - see tables below)
Construction: Machined aluminum
Weight: 26 oz (728 gr) without mounting stud, 30.5 oz (854 gr) with mounting stud
Air Inlet: 1/4" NPS (M)
Fluid Inlet: 3/8" NPS (M)
Fluid Passages: 300 grade stainless steel
Feed Type: Pressure feed
Gun Repair Kit: KK-4992-1
- Model No. (Avail. tip sizes)
- Typical Applications
- FluidTip/Needle Construction
- AGX-550 (AC, D, E, FF, FX, G)
- Most conventional materials and most waterbornes and chlorinated solvents
- 400 Gr. Stainless
300 Gr. Stainless
- AGX-551 (D, EE, FF)
- Abrasive materials (i.e. porcelain enamel, ceramic glazes, buffing compounds) and/or water mix materials. Includes abrasive seal.
- Carboloy, 400 Gr. Stainless
- AGX-553 (E, FF, FX)
- Waterbornes and more corrosive materials (below 7 pH)
- 303 Gr. Stainless w/U.H.M.W. poly. insert)
- Tip
- Size
- AC
- .110" (2.8 mm)
- D
- .086" (2.2 mm)
- E
- .070" (1.8 mm)
- EE
- .070" (1.8 mm)
- FF
- .050" (1.4 mm)
- FX
- .042" (1.1 mm)
- G
- .028" (.7 mm)
DeVilbiss Compact 507 Pressure Feed Spray Gun
Description:
Designed for superior finish performance, Built for ergonomic comfort, maximum efficiency, regulatory compliance and environmental responsibility, Tested and approved worldwide
Technical Specifications:
Body: Drop Forged Aluminum
Weight: 14.6 oz. (412g) gun only
Air Inlet: 1/4" Universal Thread
Fluid Inlet: 3/8" Universal Thread
Fluid Passages: Stainless Steel
Feed Type: Pressure feed
Service Bulletin: SB-2-545
Gun Repair Kit: Consult Service Lit.
Model Numbers:
COM-PS507B-10-00
COM-PS507B-22-00
DeVilbiss HVLP Compact Automatic I HVLP Spray Gun
Description:
The DeVilbiss Compact gun allows you to maintain EPA compliance and produce a superb finish. Built to provide outstanding coating atomization, the "Blue" Compact can handle all types of solvent and waternborne materials. High performance is coupled with a gun body light in weight and designed for operator comfort to increase productivity.
The DeVilbiss Compact Automatic I has the following features:
- Wide range of air caps
- Removable stainless steel spray head for fast and easy maintenance
- Control of spray performance and fluid flow is unequalled with the fluid adjusting knob
- Stainless steel passages (for waterborne and solvent based materials)
- Independent fan, atomizing and triggering air, vital for robotic and automatic spray machine applications
Technical Specifications:
Name: Compact Automatic I HVLP Spray Gun
Model: CMAI-xxx Compact Automatic "X" (user selects)
Fluid Inlet: 1/4" BSPP (F)
Air Inlet: 1/4" BSPP (F)
Cylinde Air Inlet: 1/8" BSPP (F)
Max. Temperature in Use: 104°F (40°C)
Gun Weight: 1.44 lbs. (656 gms)
Construction: Aluminum hard anodized
Tip / Needle / Sprayhead: 303 gr. stainless steel
- Air Cap Number
- 506
- 507
- 508
- Spray Gun Type
- Automatic
- Automatic
- Automatic
- Fluid Tip Dia. in/mm
- .033 (.85 mm)
- L
- Fluid Tip Dia. in/mm
- .039 (1.0 mm)
- LM
- LM
- LM
- Fluid Tip Dia. in/mm
- .055 (1.4mm)
- M
- M
- LM
- Fluid Tip Dia. in/mm
- .070 (1.8 mm)
- M, H
- M, H
L - Low Viscosity (20 sec. Zahn 2 and Lower) M - Medium Viscosity (31-45 sec. Zahn 2)
LM - Low to Medium Viscosity (21-30 sec. Zahn 2) H - High Viscosity (46 sec. Zahn 2 and Higher)
Click Here For Service Information - Compact Automatic "I"
Click Here For Sales Information
DeVilbiss HVLP Compact Automatic "X" Spray Gun
Description:
The DeVilbiss Compact Automatic "X" has all the features of the Compact Automatic "I" plus fast and easy removal from the mounting block:
- No tools required for detachment
- Recirculating and non-recirculating gun head - all in one
- Fixed gun positioning
- Small foot print
Technical Specifications:
Name: Compact Automatic X Conventional Spray Gun
Model: CMAX-xxx Compact Automatic "X" (user selects)
Fluid Inlet: 1/8" BSPP (F)
Air Inlet: 1/8" BSPP (F)
Cylinde Air Inlet: 1/8" BSPP (F)
Max. Temperature in Use: 104°F (40°C)
Gun Weight: 950 gms or 2.0 lbs.
Construction: Aluminum hard anodized
Tip / Needle / Sprayhead: 303 gr. stainless steel
- Air Cap Number
- 430
- 443
- 497
- 500R
- Spray Gun Type
- Automatic
- Automatic
- Automatic
- Automatic
- Fluid Tip Dia. in/mm
- .039 (1.0mm)
- LM
- LM
- LM
- LM
- Fluid Tip Dia. in/mm
- .055 (1.4mm)
- M
- M
- M
- M
- Fluid Tip Dia. in/mm
- .070 (1.8 mm)
- M, H
- M, H
- M, H
- M, H
- Fluid Tip Dia. in/mm
- .086 (2.2mm)
- H
- H
- H
- H
- Pressure, Siphon or Gravity Feed
- S, P, G
- P
- P
- P
L - Low Viscosity (20 sec. Zahn 2 and Lower) M - Medium Viscosity (31-45 sec. Zahn 2)
LM - Low to Medium Viscosity (21-30 sec. Zahn 2) H - High Viscosity (46 sec. Zahn 2 and Higher)
Click Here For Service Information - Compact Automatic "X"
Click Here For Sales Information
DeVilbiss Compact Gravity Feed Spray Gun
Description: Compact, HVLP (Blue), Gravity Feed
Designed for superior finish performance, Built for ergonomic comfort, maximum efficiency, regulatory compliance and environmental responsibility, Tested and approved worldwide.
Technical Specifications:
Body: Drop Forged Aluminum
Weight: 14.1 oz. (400g) gun only
Air Inlet: 1/4" Universal Thread
Fluid Inlet: 3/8" Universal Thread
Fluid Passages: Aluminum
Feed Type: Gravity Feed
Gun Repair Kit: Consult Service Lit.
Click Here For Service Information
Click Here For Sales Information
DeVilbiss Compact Pressure Feed Manual HVLP Spray Gun
Description:
Designed for superior finish performance, Built for ergonomic comfort, maximum efficiency, regulatory compliance and environmental responsibility. HVLP spray equipment is tested and approved worldwide.
Models:
COM-PS506B-10-00
COM-PS506B-14-00
COM-PS506B-18-00
COM-PS506B-22-00
COM-PS507B-08-00
COM-PS507B-10-00
COM-PS507B-14-00
COM-PS507B-18-00
COM-PS507B-22-00
COM-PS508B-10-00
COM-PS508B-14-00
- Air Cap Number
- 506
- 507
- 508
- Spray Gun Type
- Manual
- Manual & Automatic
- Manual & Automatic
- Fluid Tip Dia.
- .033 (.85 mm)
- L
- Fluid Tip Dia. in/mm
- .039 (1.0mm)
- LM
- LM
- LM
- Fluid Tip Dia. in/mm
- .055 (1.4mm)
- M
- M
- LM
- Fluid Tip Dia. in/mm
- .070 (1.8 mm)
- M, H
- M, H
- Fluid Tip Dia. in/mm
- .086 (2.2mm)
- H
- H
Technical Specifications:
Name: Compact HVLP (Blue) Pressure Feed
Model: COM-PSxxx-xx-xx (user selects, 3 Air Caps to choose from)
Gun Category: Conventional
Gun Type: Manual
Fluid Passages: Stainless Steel
Air Inlet: 1/4" Universal Thread
Fluid Inlet: 3/8" Universal Thread
Weight: 14.6 oz. (412g) gun only
Construction: Drop Forged Aluminum
Color: Blue
- Air Cap Number
- 506
- 507
- 508
- Spray Gun Type
- Manual
- Manual & Automatic
- Manual & Automatic
- Fluid Tip Dia.
- .033 (.85 mm)
- L
- Fluid Tip Dia. in/mm
- .039 (1.0mm)
- LM
- LM
- LM
- Fluid Tip Dia. in/mm
- .055 (1.4mm)
- M
- M
- LM
- Fluid Tip Dia. in/mm
- .070 (1.8 mm)
- M, H
- M, H
- Fluid Tip Dia. in/mm
- .086 (2.2mm)
- H
- H
Click Here For Service Information
Click Here For Sales Information
DeVilbiss HVLP Compact Siphon Feed Spray Gun
Description:
Designed for superior finish performance, Built for ergonomic comfort, maximum efficiency, regulatory compliance and environmental responsibility, Tested and approved worldwide.
Technical Specifications:
Body: Drop Forged Aluminum
Weight: 14.1 oz. (400g) gun only
Air Inlet: 1/4" Universal Thread
Fluid Inlet: 3/8" Universal Thread
Fluid Passages: Stainless Steel
Feed Type: Siphon Feed
Gun Repair Kit: Consult Service Lit
Click Here For Service Information
Click Here For Sales Information
DeVilbiss HVLP EGHV-531 Touch-Up Spray Gun
Description:
Comfortable and easy-to-use, the EGHV Touch-Up spray gun provides precise control for the most exacting detail and touch-up work. The gun features a long tapered fluid needle and a top-mounted trigger, and weighs only 7.5 ounces, making it ideal for hours of fatigue-free precision painting. Offers fluid delivery by attached suction feed or remote pressure feed cup.
Technical Specifications:
Name: EGHV (HVLP) Touch Up Gun
Model: EGHV-531-397E
Construction: Drop forged aluminum
Weight: 7.5 oz (210 gr)
Air Inlet: 1/4" NPS (M)
Fluid Inlet: 1/4" NPS (M)
Fluid Passages: 300 grade stainless steel
Feed Type: Pressure feed,Suction feed
Optional Cups: 8 oz. Cup (TGS-503) polyethylene, KB-555 2 qt. aluminum cup and KB-545-SS, 2 qt. stainless steel cup
Gun Repair Kit: KK-5044
Click Here For Service Information
Click Here For Sales Information
DeVilbiss EXL HVLP Pressure Feed Spray Gun
Description:
Advanced technology for the professional painter, precision engineered patented #2000 air cap, large spray pattern for fast coverage, even distribution of materials for no mottling or striping, optimum atomization for clearcoats and single stages, lightweight and comfortable, economical servicing, highly efficient HVLP design, low air pressure and volume requirements.
Technical Specifications:
Name: EXL HVLP Pressure Feed
Model: EXL-520x-xx (see Models tab)
Fluid Passages: Anodized Aluminum, Stainless Steel
Fluid Inlet: 3/8" NPS (M)
Air Inlet: 1/4" NPS (M)
Weight: 22.4 oz (627gr)
Construction: Drop Forged Aluminum
Feed Type: Pressure feedbr> Gun Repair Kit: KK-5058-2
Click Here For Service Information
Click Here For Sales Information
EXL HVLP Suction Feed Spray Gun
Description:
Advanced technology for the professional painter, precision engineered patented #2000 air cap, large spray pattern for fast coverage, even distribution of materials for no mottling or striping, optimum atomization for clearcoats and single stages, lightweight and comfortable, economical servicing, highly efficient HVLP design, low air pressure and volume requirements.
Shown with optional 1 quart cup ; please order separately.
Technical Specifications:
Name: EXL HVLP Suction Feed
Model: EXL-520S-xx (see Models tab)
Fluid Passages: Anodized Aluminum, Stainless Steel
Fluid Inlet: 3/8" NPS (M)
Air Inlet: 1/4" NPS (M)
Optional Cups: TGC-545 1 qt. Aluminum Suction Cup
TLC-555 1 qt. Aluminum Suction Cup (PTFE lined)
TSC-595 1 qt. Stainless Steel Suction Cup
Weight: 33.6 oz (941gr)
Construction: Drop Forged Aluminum
Feed Type: Suction feed
Gun Repair Kit: KK-5058-2
Click Here For Service Information
Click Here For Sales Information
DeVilbiss EXL-620 HVLP GRAVITY Feed Spray Gun
Description:
Advanced technology for the professional painter, precision engineered patented #2000 air cap, large spray pattern for fast coverage, even distribution of materials for no mottling or striping, optimum atomization for clearcoats and single stages, lightweight and comfortable, economical servicing, highly efficient HVLP design, low air pressure and volume requirements
EXL HVLP Spray Gun (EXL-620G) includes:
1-Liter aluminum cup (GFC-502) with push-on lid
Air cap cleaning kit, spray lube, fluid filter, gun hook,E-Z Liner™ disposable cup liners (OMX-70-K48)
Technical Specifications:
Body: Drop Forged Aluminum
Weight: 27.2 oz (762gr) w/cup
Air Inlet: 1/4" NPS (M)
Fluid Inlet: 3/8" BSP (F)
Fluid Passages: Anodized Aluminum
Feed Type: Gravity Feed
Gun Repair Kit: KK-5058-2
Click Here For Service Information
Click Here For Sales Information
DeVilbiss HVLP Finishline FLG4 Gravity Feed Spray Gun
Description:
Economical, yet durable, high quality, all metal construction and precision engineered to produce well-atomized uniform spray patterns. Stainless steel fluid tip and needle. Gun comes equipped with the DeKups™ Disposable cup system.
Technical Specifications:
Name: FLG4 Gravity Feed
Model: FLG-HVG-315
Fluid Passages: Anodized Aluminum
Fluid Inlet: 3/8" NPS female
Air Inlet: 1/4" NPS male
Cup: 24 oz. DeKups Disposable Cup System
Weight: 23.32 oz./6621g w / cup
Construction: Forged Aluminum
Feed Type: Gravity Feed
Click Here For Service Information
Click Here For Sales Information
DeVilbiss HVLP FinishLine FLG4 Pressure Feed Spray Gun
Description:
Economical, yet durable, high quality, all metal construction and precision engineered to produce well-atomized uniform spray patterns. Stainless steel fluid tip and needle.
Technical Specifications:
Name: FinishLine FLG4 Pressure Feed
Model: FLG-HVP-315
Fluid Passages: Anodized Aluminum
Fluid Inlet: 3/8" NPS (M)
Air Inlet: 1/4" NPS (M)
Weight: 19.43 oz. / 551 g
Construction: Forged Aluminum
Feed Type: Pressure feed
Gun Repair Kit: FLG4-488-K
Gun Repair Kit: FLG4-488-K
Click Here For Service Information
Click Here For Sales Information
DeVilbiss HVLP Finishline FLG4 Siphon Feed Spray Gun
Description:
Economical, yet durable, high quality, all metal construction and precision engineered to produce well-atomized uniform spray patterns. Stainless steel fluid tip and needle.
Technical Specifications:
Name: FinishLine FLG4 Siphon Feed
Model: FLG-HVS-322
Fluid Passages: Anodized Aluminum
Fluid Inlet: 3/8" NPS (M)
Air Inlet: 1/4" NPS (M)
Cup: 24 oz. DeKups Disposable Cup
Weight: 26.73 oz. / 758 g oz. w / cup
Construction: Forged Aluminum
Fluid Passages: Aluminum
Feed Type: Suction feed
Gun Repair Kit: FLG4-488-K
Click Here For Service Information
Click Here For Sales Information
DeVilbiss HVLP JGA Suction Feed Spray Gun (Std. size body)
Description:
The JGA-HVLP suction feed spray gun offers easy-to-use suction feed operation with the high transfer efficiency of HVLP. That means you get the flow rate and uniform spray patterns you want using conventional suction feed fluid delivery. 300-grade stainless steel fluid passages offer waterborne compatibility, corrosion resistance and protection from harsh self-etching primers.
Technical Specifications:
Name: JGA-HVLP Suction Feed
Model: JGA-510-57xx (Cup not included, order separately)
Fluid Passages: 300 grade stainless steel
Fluid Inlet: 3/8" NPS (M)
Air Inlet: 1/4" NPS (M)
Weight: 21.4 oz (608 gr)
Construction: Drop forged aluminum
Feed Type: Suction feed
Gun Repair Kit: KK-4987-2
Click Here For Service Information
Click Here For Sales Information
DeVilbiss HVLP JGA-510 Pressure Feed
Description:
For quality results and continuous output production, our JGA-HVLP spray gun is hard to beat. It delivers smooth triggering action and a comfortable fit and feel, so operators enjoy better control and less fatigue. It also provides good atomization and high transfer efficiency, and is ideal for applications with limited air supply.
Technical Specifications:
Name: JGA-HVLP Pressure Feed
Model: JGA-510-98FX (Cup not included, order separately)
Fluid Passages: 300 grade stainless steel
Fluid Inlet: 3/8" NPS (M)
Air Inlet: 1/4" NPS (M)
Weight: 20.4 oz (578 gr)
Construction: Drop forged aluminum
Feed Type: Pressure feed
Gun Repair Kit: KK-4987-2
Click Here For Service Information
Click Here For Sales Information
DeVilbiss HVLP JGHV-531 Spray Gun
Description:
The JGHV Standard-Size manual spray gun gives you the best of everything - the comfortable fit and feel of DeVilbiss' classic JGA spray gun, combined with the high transfer efficiency and superior atomization of HVLP.
Technical Specifications:
Name: JGHV Standard Size Maximum Performer
Model: JGHV-531-xxxx (user selects)
Fluid Passages: 300 grade stainless steel
Fluid Inlet: 3/8" NPS (M)
Air Inlet: 1/4" NPS (M)
Weight: 20.8 oz (599 gr)
Construction: Drop forged aluminum
Feed Type: Pressure feed
Gun Repair Kit: KK-4987-2
Click Here For Service Information
Click Here For Sales Information
DeVilbiss LVMP Compact I Auto Spray Gun
Description:
A highly sophisticated automatic gun, the Compact Automatic X can be detached from its mounting block in a few seconds via the easy thumb release mechanism, for fast and easy maintenance and serviceability. This special feature from DeVilbiss dramatically reduces production downtime. In addition, the DeVilbiss Compact Automatic "X" has all the features of the Compact Automatic "I".
- No tools required for detachment
- Recirculating and non-recirculating gun head -- all in one
- Fixed gun positioning
- Small foot print
Technical Specifications:
Name: Compact Automatic Trans-Tech (Green) Spray Gun
Model: CMAI-xxx-xxx Compact Automatic "I"
Fluid Inlet & Recirculation: 1/4" BSPP (F)
Air Inlet (atomization & fan) "A" & "F": 1/4" BSPP (F)
Max. Temperature in Use: 104°F (40°C)
Gun Weight: 950 gms or 2.0 lbs.
Construction: Aluminum hard anodized
Tip / Needle / Sprayhead: 303 gr. stainless steel
- Air Cap Number
- 510
- 513
- 522
- 590
- 591
- Spray Gun Type
- Auto
matic - Auto
matic - Auto
matic - Auto
matic - Auto
matic
- Fluid Tip Dia.
- .020 (.50 mm)
- L
- L
- Fluid Tip Dia.
- .033 (.85 mm)
- L
- L
- L
- Fluid Tip Dia.
- .039 (1.0mm)
- LM
- LM
- LM
- Fluid Tip Dia.
- .055 (1.4mm)
- M
- M
- M
- Fluid Tip Dia.
- .070 (1.8 mm)
- M, H
- M, H
- M, H
L - Low Viscosity (20 sec. Zahn 2 and Lower) M - Medium Viscosity (31-45 sec. Zahn 2)
LM - Low to Medium Viscosity (21-30 sec. Zahn 2) H - High Viscosity (46 sec. Zahn 2 and Higher)
Click Here For Service Information - Compact Automatic "I"
Click Here For Sales Information
DeVilbiss LVMP Compact Mini Touch-up Spray Gun
Description:
This Compact MINI spray gun is a professional quality gun designed with both high volume, low pressure (HVLP) technology or Trans-Tech technology. HVLP technology reduces overspray and limits air cap pressure to .07 bar (10 psi) and complies with SCAQMD regulations.
The COMM-HS1-10DPC Compact MINI HVLP Gravity Touch-Up Gun is available with the 9 Oz. DeKups Package. The DeKups package includes:
- DPC-23 DeKups Adapter - 1 ea.
- Reusable Cup - 1 ea.
- Reusable Lid - 1 ea.
- Measure Guide - 1 ea.
- Orange Plug - 1 ea.
- Disposable Cup - 4 ea.
Technical Specifications:
Name: Compact MINI Touch-Up
Model: COMM-sss-ss (user selects, see table below)
Technology: HVLP
Construction: Anodized aluminum
Weight: 15.0 oz. (425 g) gun only, 17.1 oz. (485g) with cup
Air Supply Connection: Univeral 1/4" BSP and 1/4" NPS male
Color: Blue
- Part Number
- Description
- COMM-HS1-10
- HVLP 1.0 mm Fluid Nozzle
- COMM-HS1-12
- HVLP 1.2 mm Fluid Nozzle
- COMM-HS1-10DPC
- HVLP 1.0 mm Fluid Nozzle with DeKups Package
Click Here For Service Information - Compact Automatic "I"
Click Here For Sales Information
DeVilbiss LVMP Compact Trans-Tech (Green) Gravity Feed
Description:
Designed for superior finish performance, built for ergonomic comfort, energy savings, maximum efficiency and environmental responsibility, Tested and approved worldwide.
Technical Specifications:
Name: Compact Trans-Tech (Green) Gravity Feed
Model: COM-G510G-xxx-xx (user selects)
Fluid Passages: Stainless Steel
Fluid Inlet: 3/8" Universal Thread
Air Inlet: 1/4" Universal Thread
Weight: 14.1 oz. (400g) gun only
Construction: Drop Forged Aluminum
Feed Type: Gravity Feed
- Air Cap Number
- 510
- Fluid Tip Dia. in/mm
- .033 (.85 mm)
- L
- Fluid Tip Dia. in/mm
- .039 (1.0 mm)
- LM
- Fluid Tip Dia. in/mm
- .055 (1.4 mm)
- M
- Fluid Tip Dia. in/mm
- .070 (1.8mm)
- M, H
L - Low Viscosity (20 sec. Zahn 2 and Lower)
M -Medium Viscosity (31-45 sec. Zahn 2)
LM - Low to Medium Viscosity (21-30 Viscosity)
H - High Viscosity (46 sec. Zahn 2 and Higher) (21-30 sec. Zahn 2)
Click Here For Service Information - Compact Automatic "I"
Click Here For Sales Information
DeVilbiss LVMP Compact Trans-Tech Pressure Feed Spray Gun
Description:
Maximum efficiency with environmental responsibility.
Designed for superior finish performance, Built for ergonomic comfort, energy savings, maximum efficiency and environmental responsibility, Tested and approved worldwide.
Technical Specifications:
Name: Compact (Green) Pressure Feed
Model: COM-PSxxx-xx-xx (user selects, 3 Air Caps to choose from)
Gun Category: Conventional
Gun Type: Manual
Fluid Passages: Stainless Steel
Air Inlet: 1/4" Universal Thread
Fluid Inlet: 3/8" Universal Thread
Weight: 14.6 oz. (412g) gun only
Feed Type: Pressure
Construction: Drop Forged Aluminum
Color: Green
- Air Cap Number
- 510
- 513
- 522
- Spray Gun Type
- Manual & Automatic
- Manual & Automatic
- Manual & Automatic
- Fluid Tip Dia. in/mm
- .033 (.85 mm)
- L
- L
- L
- Fluid Tip Dia. in/mm
- .039 (1.0mm)
- LM
- LM
- LM
- Fluid Tip Dia. in/mm
- .055 (1.4mm)
- M
- M
- M
- Fluid Tip Dia. in/mm
- .070 (1.8 mm)
- M, H
- M, H
- M, H
- Fluid Tip Dia. in/mm
- .086 (2.2 mm)
- H
L - Low Viscosity (20 sec. Zahn 2 and Lower)
M -Medium Viscosity (31-45 sec. Zahn 2)
LM - Low to Medium Viscosity (21-30 Viscosity)
H - High Viscosity (46 sec. Zahn 2 and Higher) (21-30 sec. Zahn 2)
Click Here For Service Information - Compact Automatic "I"
Click Here For Sales Information
DeVilbiss LVMP Compact Trans-Tech Siphon Feed Spray Gun
Description:
Designed for superior finish performance, built for ergonomic comfort, energy savings, maximum efficiency and environmental responsibility, tested and approved worldwide.
Technical Specifications:
Name: Compact Trans-Tech (Green) Siphon Feed
Model: COM-PS510G-xx-xx (user selects)
Fluid Passages: Stainless Steel
Fluid Inlet: 3/8" Universal Thread
Air Inlet: 1/4" Universal Thread
Cup: Aluminum Siphon Cup 1qt., TGC-545
Weight: 14.6 oz. (412g) gun only
Construction: Drop Forged Aluminum
Feed Type: Siphon Feed
Gun Repair Kit: Consult Service Lit.
Click Here For Service Information - Compact Automatic "I"
Click Here For Sales Information
DeVilbiss LVMP Compact X Auto Spray Gun
Description:
A highly sophisticated automatic gun, the Compact Automatic X can be detached from its mounting block in a few seconds via the easy thumb release mechanism, for fast and easy maintenance and serviceability. This special feature from DeVilbiss dramatically reduces production downtime. In addition, the DeVilbiss Compact Automatic "X" has all the features of the Compact Automatic "I".
- No tools required for detachment
- Recirculating and non-recirculating gun head -- all in one
- Fixed gun positioning
- Small foot print
Technical Specifications:
Name: Compact Automatic Trans-Tech (Green) Spray Gun
Model: CMAX-xxx-xxx Compact Automatic "I" and "X" (user selects)
Fluid Inlet & Recirculation "P" & "R": 1/8" BSPP (F)
Air Inlet (atomization & fan) "A" & "F": 1/8" BSPP (F)
Max. Temperature in Use: 104°F (40°C)
Gun Weight: 950 gms or 2.0 lbs.
Construction: Aluminum hard anodized
Tip / Needle / Sprayhead: 303 gr. stainless steel
- Air Cap Number
- 510
- 513
- 522
- 590
- 591
- Spray Gun Type
- Auto
matic - Auto
matic - Auto
matic - Auto
matic - Auto
matic
- Fluid Tip Dia.
- .020 (.50 mm)
- L
- L
- Fluid Tip Dia.
- .033 (.85 mm)
- L
- L
- L
- Fluid Tip Dia.
- .039 (1.0mm)
- LM
- LM
- LM
- Fluid Tip Dia.
- .055 (1.4mm)
- M
- M
- M
- Fluid Tip Dia.
- .070 (1.8 mm)
- M, H
- M, H
- M, H
L - Low Viscosity (20 sec. Zahn 2 and Lower) M - Medium Viscosity (31-45 sec. Zahn 2)
LM - Low to Medium Viscosity (21-30 sec. Zahn 2) H - High Viscosity (46 sec. Zahn 2 and Higher)
Click Here For Service Information - Compact Automatic "X"
Click Here For Sales Information
Kremlin Paint Spray Guns
Kremlin Conventional M22 A BasiK HPA Siphon Feed
Description:
The M22 A BasiK HPA is our economy gun with unsurpassed ergonomics. It is designed for conventional suction fed spraying.
Features:
Polished aluminum body.
E-Z adjust aircap.
New design of the BA aircap.
Benefits:
Easy and quick maintenance.
Allows adjustment without loosening the retaining ring.
Spraying quality guaranteed.
Specifications:
- Sprayed materials
- Virtually all coatings
- Body of the gun
- Polished Forged Aluminum
- Maximum air inlet pressure (bar)
- 6
- Recommended atomization air pressure (bar)
- 2.5 - 3.5
- Air consumption (m3/h)
- Weight (with cup) (g)
- 1000
- Transfer efficiency in % (EN 13966-1)
- 62
- Maximum Fluid Temperature (°C)
- 50
- Nozzle
- Stainless steel
- Wetted parts
- Stainless steel
Fittings:
- Air Inlet
- M 1/4" NPS (+ M 1/4" BSP)
- Fluid Inlet
- M 3/8" NPS
Kremlin Conventional M22 A BasiK HPA
Description:
The M22 A HPA is a suction fed gun with unsurpassed ergonomics designed for hard to atomize coatings. Precise air adjustment at the handle.
Features:
Polished aluminum body.
E-Z adjust aircap.
New design of the BA aircap.
Benefits:
Easy and quick maintenance.
Allows adjustment without loosening the retaining ring.
Spraying quality guaranteed.
Specifications:
- Sprayed materials
- Virtually all coatings
- Body of the gun
- Polished Forged Aluminum
- Maximum air inlet pressure (bar)
- 6
- Recommended atomization air pressure (bar)
- 2.5 - 3.5
- Air consumption (m3/h)
- Weight (with cup) (g)
- 1000
- Transfer efficiency in % (EN 13966-1)
- 62
- Maximum Fluid Temperature (°C)
- 50
- Nozzle
- Stainless steel
- Wetted parts
- Stainless steel, aluminum
Fittings:
- Air Inlet
- M 1/4" NPS (+ M 1/4" BSP)
- Fluid Inlet
- M 3/8" NPS
Kremlin M22 G HTi Paint Spray Gun
Kremlin M22 G HTi: gravity feed gun that delivers high finish quality and transfer efficiency.
Kremlin M22 G HTi: The M22 G HTi is a gravity fed gun that delivers high finish quality and transfer efficiency with outstanding operator comfort. Available with one of 2 aircaps; EP5 for hard to atomize coatings such as high solids and waterbornes or the E5 K HVLP for optmizing efficiency and HVLP compliant airspray.
Specifications:
- Sprayed materials
- Virtually all coatings
- Body of the gun
- Anodized Forged Aluminum
- Maximum air inlet pressure (bar)
- 90 psi / (bar) 6
- Recommended atomization air pressure (bar)
- EP5: 29-44 psi / (2-3 bar)
E5 K HVLP: 22.5-37.5 psi / (1.5-2.5 bar)
- Air consumption (m3/h)
- EP5: 11.89 cfm @ 37.5 psi (20 m3/h @ 2.5 bar)
E5 K HVLP: 16 cfm @ 30 psi (27.2 m3h @ 2 bar1)
- Weight (with cup) (g)
- 24 oz. / (680 g)
- Transfer efficiency in % (EN 13966-1)
- EP5: 74%
E5 K HVLP: 76%
- Maximum Fluid Temperature (°C)
- 122ºF / (50ºC)
- Tip
- Stainless steel
- Nozzle
- Stainless steel
- Wetted parts
- Stainless steel, aluminum
Manual Spray gun AIRMIX® Xcite™ 120 & 200 with Fluid Swivel Fitting
The Kremlin Xcite™ Manual Spray gun uses high quality components which ensure a perfect reliability maintaining a high level of performances. The last generation of Airmix® atomization aircap offers unsurpassed finish quality.
- FEATURES
- BENEFITS
- New ergonomic body design for comfort, fit and feel plus swivel fitting
- Reduced operator fatigue increases productivity
- Stainless steel fluid passages
- Compatible with water-based materials
- New Airmix® aircap
- Superior finish quality
- Precise fan width adjustment knob
- Ability to adjust the fan width to the shape of the part to be painted leads to higher efficiency and productivity
- Increased transfer efficiency
- Outstanding finish quality with reduced overspray
- E-Z adjust aircap
- Quick, easy adjustment
MATERIAL HANDLED: One component or two component solvent or water-based materials, high solids, varnishes, lacquers, polyurethanes, stains, solvent or water-based adhesives.
Xcite™ Spray Guns with fluid swivel fitting
- Description
- Aircap
- Tip
- Xcite™ 120
- VX24 K HVLP
- Please specify
- Xcite™ 200
- VX24 K HLVP
- Please specify
- Max. Fluid Pressure
- Seat
- Part Number
- 1740 psi (120 bar)
- Stainless Steel
- 668-720-100
- 2900 PSI (200 bar)
- Carbide
- 668-720-200
Xcite™ 120, c/w aircap, tip, w/o swivel fitting is part number 668-720-400
Kremlin Airless AIRMIX® Medium Pressure Xcite™ 400 Gun
Description:
The Xcite™ gun is the result of KREMLIN REXSON experience since 1925. The Xcite™ gun brings an excellent comfort to the operator. Its ultra-light trigger, its design, its ergonomic and its swivel fitting reduce the operator fatigue, improve the productivity and stop all risks of RSI (Repetitive strains injuries)
The new Xcite™ 400 gun uses high quality components which ensure a perfect reliability maintaining a high level of performances. The Xcite™ 400 is dedicated to apply single component adhesives and sealants, MS polymers, water-based adhesives, greases, waxes and a large range of thick materials requiring an atomization pressure higher than 200 bar.
The sprayer has the ability to significantly vary the pattern without changing the tip while using minimum atomization air and pressure. It's really useful when painting complex shape parts
- Sprayed materials
- Single component adhesives and sealants, MS polymers, water-based adhesives, greases, waxes and a large range of thick materials, etc...
- Body of the gun
- Forged aluminum
- Fluid Pressure Range (bar)
- 20 - 400
- Maximum air inlet pressure (bar)
- 6
- Recommended atomization air pressure (bar)
- 0.7 - 3
- Fluid output (l/mn)
- Depends on the tip used
- Weight construction with fluid swivel fitting (g)
- 587
- Maximum Fluid Temperature (°C)
- 50
- Air consumption (m3/h)
- 3.2 - 7.5
- Wetted parts
- Stainless steel, PTFE, carbide
- Safety
- Trigger lock
- Filter (fitted on fluid tube)
- #6 - 85 mesh/ 168μ
Fittings:
- Fitting
- Air Inlet M 1/4 NPS
- Swivel fitting
- Fluid Inlet M 1/2" JIC
For more product details, please try our other Spray Finishing Supplies site here