Print This Page
Supplier & Distributor of Fluid Handling Pumps & Tanks
(click on thumbnail to enlarge)
Supplier & Distributor of Fluid Handling Pumps & Tanks
Norris-Wiener/Bay State Spray Equipment has been a leading distributor of paint spray equipment for our customers in the New England and New York regions since 1948. This is shown by the fluid handling pumps and tanks we offer, like the Binks PT ASME Zinc-Plated Lid/Shell tank. This product is ideal for solvent-based coatings, and contains a zinc-plated lid with an in-lid assembly containing all wetted parts. Or the new MX and Maple series of Binks High and medium pressure pumping systems. Also available from Binks is the new GEMINI Two Double Diaphragm Pump series. This cost effective pump is 30% more efficient than any other Diaphragm pump on the finishing market, with up to 5 times longer diaphragm life when compared to other pumps in its class. We also offer Ransburg's AquaBlock 2 for fluid handling management. This product provides a simple, effective way to handle water borne coatings electrostatically, providing a voltage block for the isolation of high-voltage paint applicators from grounded, water borne coating supplies.
To learn more about the fluid handling pumps and tanks we handle, please contact us directly.
Double Diaphragm Pumps
Binks Gemini II 1-1/2" Stainless Pump
The Binks Gemini II 1-1/2" stainless steel pump is ideal for a variety of water borne and solvent based coatings including adhesives, catalyzed varnishes, paints, resins, stains and solvents with 28% more delivery per cycle than previous models.
Click Here For Service Information - 41-818810
Click Here For Sales Information
- Gemini II Pumps
- 41-818810 1-1/2" Stainless
- Air Inlet Pressure Range
- 0-125 PSI
- Air Inlet Size
- 3/4" NPT
- Max Fluid Pressure
- 125 PSI (8.6 bar)
- Fluid Inlet / Outlet
- 1-1/2" NPT
- Max Flow Rate
- 106 gpm (170 lpm)
- Maximum Suction Lift
- 22 ft (6.7 m)
- Max Particle Size
- .25" (6mm)
- Max Temperature Limits
- 220
- Flow@ 60 Cycles/Min
- 49.2 gal (186 liters)
- Cycles Per Gallon
- 1.2
- Displacement Per Cycle
- .82 gpm (3.0 lpm)
- Noise Level with Muffler
- 95 dBA Max
- Weight
- 95 lbs (43 kg)
- Repair Kits:
- Air End Seal Kit
- 41-718858
- Diaphragm Kit
- 41-718860
- Ball and Seal Kit
- 41-718859
- Operation Manual
- 77-2993
Binks Gemini II 1" Aluminum and Stainless Pump
The Gemini II 1" is available in either aluminum or stainless steel (41-818820 shown) is ideal for a variety of water borne and solvent based coatings including adhesives, catalyzed varnishes, paints, resins, stains and solvents with 38% more delivery per cycle than previous models.
Click Here For Service Information
Click Here For Sales Information
- Gemini II Pumps
- 41-818820 1" Aluminum
- 41-818822 41-818823 (BSP) 1" Stainless
- Air Inlet Pressure Range
- 0-125 PSI
- 0-125 PSI
- Air Inlet Size
- 1/2" NPT
- 1/2" NPT
- Max Fluid Pressure
- 125 PSI (8.6 bar)
- 125 PSI (8.6 bar)
- Fluid Inlet / Outlet
- 1" NPT
- 1" NPT
- Max Flow Rate
- 45 gpm (170 lpm)
- 45 gpm (170 lpm)
- Maximum Suction Lift
- 17 ft (5.1 m)
- 17 ft (5.1 m)
- Max Particle Size
- .25" (6mm)
- .25" (6mm)
- Max Temperature Limits
- 220
- 220
- Flow@ 60 Cycles/Min
- 13.2 gal (50 liters)
- 13.2 gal (55 liters)
- Cycles Per Gallon
- 4.5
- 4.5
- Displacement Per Cycle
- .22 gpm (.84 lpm)
- .22 gpm (.84 lpm)
- Noise Level with Muffler
- 92 dBA Max
- 92 dBA Max
- Weight
- 28 lbs (12.7 kg)
- 43 lbs (19.5 kg)
- Repair Kits:
- Air End Seal Kit
- 41-718855
- 41-718855
- Diaphragm Kit
- 41-718856
- 41-718856
- Ball and Seal Kit
- 41-718857
- 41-718857
- Operation Manual
- 77-2994
- 77-2994
Binks Gemini II 1/2" Acetal Short Stroke Pum
The Binks Gemini II 1/2" acetal short stroke pump is ideal for a wide variety of spray applications. This pump is capable of 27% more fluid delivery per stroke compared to the Gemini I pump series. It also has lower pulsation compared to the competition and the Gemini I pump series.
- Gemini II Pumps
- 41-818831 1/2" Acetal Stroke Pump
- Air Inlet Pressure Range
- 0-100 PSI
- Air Inlet Size
- 1/4" NPT
- Max Fluid Pressure
- 100 PSI (6.9 bar)
- Fluid Inlet / Outlet
- 1/2" NPT
- Max Flow Rate
- 7.5 gpm (28.4 lpm)
- Maximum Suction Lift
- 8 ft (2.4 m)
- Max Particle Size
- 0.125" (3mm)
- Max Temperature Limits
- 180 F (82 C)
- Flow@ 60 Cycles/Min
- 1.68 gal (6.36 liters)
- Cycles Per Gallon
- 35.7
- Displacement Per Cycle
- .028 gpm (.106 lpm)
- Noise Level with Muffler
- 92 dBA Max
- Weight
- 14 lbs (6.4 kg)
- Repair Kits:
- Air End Seal Kit
- 41-718850
- Diaphragm Kit
- 41-718861
- Ball and Seal Kit
- 41-718854
- Operation Manual
- 77-2995
DeVilbiss Compact Conventional Gun w/the Binks Gemini Pail-Mount Pump, Part #98-3151
The DeVilbiss Compact conventional gun w/the Binks Gemini Pail-Mounted pump, hoses, 2 air regulators & fluid regulator with gauge and hoses. This outfit is ideal to help wood finishing professionals consistently achieve optimum Stain Finishing, Sealer and Top Coat application results.
Details:
Name: Compact Conventional Gun w/Gemini Pail-Mount Pump
Model: 98-3151
Gun: COM-PS-497-14-00
Pump: Gemini Pail Mounted Pump, 818160
Clean-Air Filter / Regulator: 849315
Hoses: 71-31101 (25 ft. Ergoflex air), 71-3383 (25 ft. fluid)
Typical Applications: Stain Finishing, Sealer and Top Coat
Binks Gemini II Drum Mount Packages
Reliable and affordable pump packages ideal for spray applications such as Conventional, HVLP and Trans-tech. Applications include Wood and Office Furniture, Industrial Equipment, Metal Fabrication, and Metal Maintenance.
Accessory options include: Pump, Air Control, Bypass Filter/Pulse Assembly, Siphon, and Fluid Regulator
Contact us for Package Options.
Binks Gemini II Pail Mount Packages
Reliable and affordable pump packages ideal for spray applications such as Conventional, HVLP and Trans-tech. Applications include Wood and Office Furniture, Industrial Equipment, Metal Fabrication, and Metal Maintenance.
Accessory options include: Pump, Air Control, Bypass Filter/Pulse Assembly, Agitator, Siphon, and Fluid Regulator.
Contact us for package options
Binks Gemini II Wall Mount Packages
Reliable and affordable pump packages ideal for spray applications such as Conventional, HVLP and Tran--tech. Applications include Wood and Office Furniture, Industrial Equipment, Metal Fabrication, and Metal Maintenance.
Accessory options include: Pump, Air Control, Bypass Filter/Pulse Assembly, Agitator, Siphon, and Fluid Regulator
Contact us for Package Options.
Low Pressure Pumps
Binks Maple 15 Low Pressure Piston Pump
The Binks Maple 15 pump is the finishing industry's best pump solution. Contains the best air motor and the best fluid section and is the industry leader for reliable operation, simple maintenance and hydraulic efficiency. The Binks Maple 15 operates at 3:1 ratio, delivering 6 GPM at 60 cycles per minute.
Click here for Service Literature
Click here for Sales Literature
- Ordering Information
- Maple 15
- Part #
- 104009-N
- Weight
- 46 lbs (21 kg)
- Ratio
- 3:1
- Flow @ 60 cycles/Min
- 6 gal (23 liters)
- Displacement/Cycle
- 375 cc/0.1 gal.
- Inlet Fluid Connection
- 1" Sanitary
- Outlet Fluid Connection
- 1" Sanitary
- Air Connection Wetted Materials
- 3/8" NPS (m) BSP (m)
- Max Fluid Pressure
- 300 psi (21 bar)
- Air Consumption @ 45 psi
- 0.17 scfm/cycle
- Max Air Inlet Pressure
- 100 psi (6.9 bar)
- Max Recommended Continuous Cycle Rate
- 20 cpm
- Instruction Manual Part #
- 104009
Binks Maple 30 Low Pressure Piston Pump
The Binks Maple 30 low pressure pump is one of the finishing industry's best pump solution. Contains the best air motor and the best fluid section and is the industry leader for reliable operation, simple maintenance and hydraulic efficiency. The Binks Maple 30 operates at 3:1 ratio, delivering 12 GPM at 60 cycles per minute.
Click here for Service Literature
Click here for Sales Literature
- Ordering Information
- Maple 30
- Part #
- 104010-N
- Weight
- 66 lbs (30 kg)
- Ratio
- 3:1
- Flow @ 60 cycles/Min
- 12 gal (45 liters)
- Displacement/Cycle
- 750 cc/0.2 gal.
- Inlet Fluid Connection
- 1-1/2" Sanitary
- Outlet Fluid Connection
- 1-1/2" Sanitary
- Air Connection Wetted Materials
- 3/8" NPS (m) BSP (m)
- Max Fluid Pressure
- 300 psi (21 bar)
- Air Consumption @ 45 psi
- 0.33 scfm/cycle
- Max Air Inlet Pressure
- 100 psi (6.9 bar)
- Max Recommended Continuous Cycle Rate
- 20 cpm
- Instruction Manual Part #
- 104010
Binks Maple 60 Low Pressure Piston Pump
The Binks Maple 60 low pressure pump is the finishing industry's best pump solution. Contains the best air motor and the best fluid section and is also one of the industry’s leader for reliable operation, simple maintenance and hydraulic efficiency. The Binks Maple 60 operates at 3:1 ratio, delivering 24 GPM at 60 cycles per minute.
Click here for Service Literature
Click here for Sales Literature
- Ordering Information
- Maple 60
- Part #
- 104020
- Weight
- 145 lbs (66 kg)
- Ratio
- 3:1
- Flow @ 60 cycles/Min
- 24 gal (91 liters)
- Displacement/Cycle
- 1,500 cc/0.4 gal.
- Inlet Fluid Connection
- 1-1/2" Sanitary
- Outlet Fluid Connection
- 1-1/2" Sanitary
- Air Connection Wetted Materials
- 3/8" NPS (m) BSP (m)
- Max Fluid Pressure
- 300 psi (21 bar)
- Air Consumption @ 45 psi
- 0.75 scfm/cycle
- Max Air Inlet Pressure
- 100 psi (6.9 bar)
- Max Recommended Continuous Cycle Rate
- 20 cpm
- Instruction Manual Part #
- 104020
DeVilbiss Compact HVLP Gun w/Gemini Pail-Mount Low Pressure Pump
Outfit Part # 98-3150
Description:
The DeVilbiss Compact HVLP (blue) gun w/Gemini Pail-Mounted dvp pump, hoses, 2 air regulators & fluid regulator with gauge and hoses. This outfit is ideal to help wood finishing professionals consistently achieve optimum Stain Finishing, Sealer and Top Coat application results.
Details:
Name: Compact HVLP Gun w/Gemini Pail-Mount DVP Pump
Model: 98-3150
Gun: COM-PS507B-14-00
Pump: Gemini Pail Mounted DVP Pump, 818160
Clean-Air Filter / Regulator: 849315
Hoses: 71-31101 (25 ft. Ergoflex air), 71-3383 (25 ft. fluid)
Typical Applications: Stain Finishing, Sealer and Top Coat
DeVilbiss Compact Conventional Gun w/Gemini Pail-Mount Pump
Outfit Part # 98-3151
Description:
The DeVilbiss Compact conventional gun w/Gemini Pail-Mounted pump, hoses, 2 air regulators & fluid regulator with gauge and hoses. This outfit is ideal to help wood finishing professionals consistently achieve optimum Stain Finishing, Sealer and Top Coat application results.
Details:
Name: Compact Conventional Gun w/Gemini Pail-Mount Pump
Model: 98-3151
Gun: COM-PS-497-14-00
Pump: Gemini Pail Mounted Pump, 818160
Clean-Air Filter / Regulator: 849315
Hoses: 71-31101 (25 ft. Ergoflex air), 71-3383 (25 ft. fluid)
Typical Applications: Stain Finishing, Sealer and Top Coat
Medium Pressure Pumps
Binks Maple 7/15 Medium Pressure Pump
New medium pressure pumps for recirculating and non-circulating systems at 166 cc/.04 gal displacement per cycle.
Click here for Service Literature
Click here for Sales Literature
- Ordering Information
- Maple 7/15
- Part #
- 104041-N
- Weight
- 57 lbs (26 kg)
- Ratio
- 15:1
- Flow @ 60 cycles/Min
- 2.6 gal (10 liters)
- Displacement/Cycle
- 166 cc/0.044 gal.
- Inlet Fluid Connection
- 1" Sanitary
- Outlet Fluid Connection
- 1/2" NPS Female
- Air Connection Wetted Materials
- 3/8" NPS (m) BSP (m)
- Max Fluid Pressure
- 1,575 psi (109 bar)
- Air Consumption @ 45 psi
- 0.33 scfm/cycle
- Max Air Inlet Pressure
- 100 psi (6.9 bar)
- Max Recommended Continuous Cycle Rate
- 20 cpm
- Instruction Manual Part #
- 104009
Binks Maple 8/25 Medium Pressure Pump
New medium pressure Binks Maple pump model for recirculating and non-circulating systems at 200 cc/.05 gal displacement per cycle.
Click here for Service Literature
Click here for Sales Literature
- Ordering Information
- Maple 8/25
- Part #
- 104042-N
- Weight
- 88 lbs (40 kg)
- Ratio
- 25:1
- Flow @ 60 cycles/Min
- 3.2 gal (12 liters)
- Displacement/Cycle
- 200 cc/.053 gal
- Inlet Fluid Connection
- 1" Sanitary
- Outlet Fluid Connection
- 1/2" NPS Female
- Air Connection Wetted Materials
- 3/8" NPS (m) BSP (m)
- Max Fluid Pressure
- 2,625 psi (181 bar)
- Air Consumption @ 45 psi
- 0.7 scfm/cycle
- Max Air Inlet Pressure
- 100 psi (6.9 bar)
- Max Recommended Continuous Cycle Rate
- 20 cpm
- Instruction Manual Part #
- 104042
DeVilbiss have been replaced by Binks
Kremlin EOS 10-C18 Medium Pressure Pump
The Kremlin EOS10-C18 offers a compact design, simple and reliable operation based on previous Kremlin technology. This pump is designed for quick color changes and also reduces material waste. Target markets are customers in small to medium workshop, spraying less than 13 gallons or 50 liters per day.
The outfit includes the Kremlin Xcite Spray Gun and tip, 25' Long Hose Set and a 5 gallon siphon tube.
Binks MX412 Lite Pump System Tri-Pod Mount comes with Binks AA-1600M Spray Gun
Part # MX412UC-ELT0S25
Description:
The
Binks MX Lite features the new Binks stainless steel MX412 pump.
Provides users with a low cost, robust industrial spray system which
applies a wide range of industrial coatings and an optimum finish quality
level. The magnetic detent design (patented) creates a quick stroke
changeover with no pulse or surge.
Name: MX412 Lite Bare Pump
Part Number: MX412UC-OLT0000
Pump Family: MX Series
Flow(GPM) @ 20 c/m: 13
Max. Output Pressure: 1392 psi
Ratio: 12:1
Wetted Materials: Stainless Steel
Air In: 1/4" or 3/8" NPS (m)
Fluid In: 1/2" NPS (m)
Fluid Out: 3/8" NPS (m) BPS (m)
Repair Kits: Seal Kit (UHMWPE U-Cup) (0115-01)
Binks MX412 Medium Pressure Pump System with Binks AA-1600 M Spray Gun
Package Part # MX412UC-EDW1S25
Description:
Binks
MX412, 12:1 Pump System for air assisted airless applications, for a
single gun operation, using thin to medium viscosity coatings. Photo
shown is a wall mount version with 25' air and fluid hose. Comes with
1-1/2" air gauges.
Name: MX412 Pump System
Part Number: MX412-xxxxxxx
Pump Family: MX Series
Gun: AA1600M with Flat Tip
Type: 2-Ball Piston Pump - comes in Tripod or Cart Mount version.
Flow(GPM) @ 20 c/m: 13
Ratio: 12:1
Wetted Materials: Stainless Steel, Hard Chrome, Nylon, PTFE, UHMWPE, Tungsten Carbine
Air In: 1/4" or 3/8" NPS (m)
Fuild In: 1/2 NPS (m)
Fuild Out: 3/8" NPS (m) or BPS (m)
Repair Kits: Seal Kit (UHMWPE U-Cup) (0115-010219)
Binks MX412 and MX432 Pumps
MX412 Part # MX412UC-EDC1S25
Description:
The Binks Cart Mount MX412 and MX 432 Pumps are ideal single gun air assist airless applications including urethane top coats, catalyzed coatings, varnishes, paints and stains.
Pressure Ratio 12:1, 32:1
Flow Rate at 60 cycles per minute 0.4 GPM (1.4 l/min)
Inlet Fluid Connection 1/2" NPS (m)
Outlet Fluid Connection (pump) 3/8" NPS (m) or BSP (m)
Outlet Fluid Connection (filter) 1/4" NPS (m) or BSP (m)
Air Connections 1/4" NPS (m) or 3/8" BSP (m)
Wetted Materials Stainless Steel, Hard Chrome, Nylon, PTFE, UHMWPE, Tungsten Carbide
Max Fluid Pressure with included air motor 1,390 psi (96 bar) and 3,712 psi (256 bar)
Noise 88 dB and 96 dB
Max Air Inlet Pressure 116 psi (8 bar)
Max recommended Continuous Cycle Rate Up to 20 cycles /minute
High Pressure Pumps
Binks High Pressure Piston Pump Model #MX35AA for Corrosion Control and Protective Coating
The Binks newly designed high pressure piston pump for airless application of top coats, epoxies, urethanes, and high solids materials. The robust design features stainless materials of construction for water borne and solvent based coatings and can be configured for cart or wall mounted applications.
Details:
Name: MX35AA Pump
Part Number: MX35AAXX-XAXXXXX
Pump Family: MX Heavy Duty Series
Inlet Pressure: 116 psi
Flow Rate (GPM) @ 15 c/m (continuous): 0.87
Flow Rate (GPM) @ 30 c/m (intermittent): 1.74
Ratio: 60:1
Max. Operating Temperature: 160°F. (71° C.)
Wetted Materials: Stainless Steel
Air Inlet: 3/4" BSPP/NPS (f)
Fuild Inlet: 1-1/2" NPT (m)
Fuild Outlet: 3/4" NPT (f)
Air Motor Spare Kit: 250645
Fluid Section Repair Kit: 250658
Weight: 118 lbs. (53.5 kg)
Click here for Service Information System
Click here for Service Information Air Motor
Click here for Service Information Fluid Section
Binks High Pressure Piston Pump Model #MX3070 for Corrosion Control and Protective Coating
The Binks MX3070 newly designed high pressure pump for airless application of epoxies, urethanes, roof coatings, high solids materials and other difficult-to-spray materials. The patented anti-stall air valve design delivers dependable results for low/no ice applications and uninterrupted production.
Details:
Name: MX3070 Pump
Part Number: MX370XX-XAXXXXX
Pump Family: MX Heavy Duty Series
Inlet Pressure: 116 psi
Flow Rate (GPM) @ 15 c/m (continuous): .75
Flow Rate (GPM) @ 30 c/m (intermittent): 1.50
Ratio: 70:1
Max. Operating Temperature: 160°F. (71° C.)
Wetted Materials: Carbon Steel
Air Inlet: 3/4" BSPP/NPS (f)
Fuild Inlet: 1-1/2" NPT (m)
Fuild Outlet: 3/4" NPT (f)
Air Motor Spare Kit: 250645
Fluid Section Repair Kit: 250662
Weight: 118 lbs. (53.5 kg)
Click here for Service Information System
Click here for Service Information Air Motor
Click here for Service Information Fluid Section
Binks High Pressure Piston Pump Model #MX3560 for Corrosion Control and Protective Coating
The Binks MX3560 Pump is a newly designed high pressure pump for airless application of epoxies, urethanes, roof coatings, high solids materials and other difficult-to-spray materials. The patented anti-stall air valve design delivers dependable results for low/no ice applications and uninterrupted production.
Details:
Name: MX3560 Pump
Part Number: MX3560XX-XAXXXXX
Pump Family: MX Heavy Duty Series
Inlet Pressure: 116 psi
Flow Rate (GPM) @ 15 c/m (continuous): .87
Flow Rate (GPM) @ 30 c/m (intermittent): 1.74
Ratio: 60:1
Max. Operating Temperature: 160°F. (71° C.)
Wetted Materials: Carbon Steel
Air Inlet: 3/4" BSPP/NPS (f)
Fuild Inlet: 1-1/2" NPT (m)
Fuild Outlet: 3/4" NPT (f)
Air Motor Spare Kit: 250645
Fluid Section Repair Kit: 250658
Weight: 118 lbs. (53.5 kg)
Click here for Service Information System - English
Click here for Service Information Air Motor
Click here for Service Information Fluid Section
Extrusion Pumps
Pressure Tanks
Binks PT ASME Zinc Plated Lid/Shell (83C-210)
Description:
Binks Zinc plated lid and all wetted parts in lid assembly and tank shell. Use for solvent-borne materials. Disposable liners available for ease of cleaning.
The following configurations are available:
83C-210 - Single regulator, no agitation
83C-220 - Double regulator, no agitation
83C-211 - Single regulator, direct drive agitator
83C-221 - Double regulator, direct drive agitator
Details:
Name: PT ASME Zinc Plated Lid/Shell
Part Number: 83C Series
Family: PT ASME Code Tanks
Type: Pressure Tank
Max Output Pressure: 80 PSi
Wetted Materials: Zinc Plated
Air Inlet: 1/4" NPS
Fluid Outlet: 3/8" NPS
Capacity: 2.8 Gallons
Fits Pail Size: accepts one gallon pails
Regulation: Single or Double
Agitator: Direct Drive or None
Liners: PT-78-K10 or K60
Bottom Outlet: None
Binks PT ASME Stainless Steel (SS) Lid/Zinc Shell (83Z-210)
Description:
Stainless Steel lid , pick-up tube and all fluid fittings. Zinc plated tank shell. Disposable tank liner makes this tank water-borne compatible.
The following configurations are available:
83Z-210 - Single regulator, no agitation
83Z-220 - Double regulator, no agitation
83Z-211 - Single regulator and direct drive agitator
83Z-221 - Double regulator and direct drive agitator
Details:
Name: PT ASME SS Lid/Zinc Shell
Part Number: 83Z Series
Family: PT ASME Code Tanks
Type: Pressure Tank
Max Output Pressure: 80 PSi
Wetted Materials: Stainless Steel Lid, Wetted Lid parts, Zinc Plated tank shell
Air Inlet: 1/4" NPS
Fluid Outlet: 3/8" NPS
Capacity: 2.8 Gallons
Fits Pail Size: accepts one gallon pails
Regulation: Single or Double
Agitator: Direct Drive or None
Liners: PT-78-K10 or K60
Bottom Outlet: None
Binks Galvanized Fluid Handling Tanks
Description:
Galvanized lid and tank shell. Disposable liners are available for ease of cleaning.
Details:
2 Gallon Galvanized
2 Gallon Solvent Saver Tank
5 Gallon Galvanized
10 Gallon Galvanized
15 Gallon Galvanized
30 Gallon Standard Galvanized
60 Gallon Standard Galvanized
Click here for more Sales Info
Click here for more Service info for 5, 10, 15 Gal. Tank
Binks Stainless Steel Fluid Handling Tanks
Description:
Tank
sizes available 2 gal., 5 gal, 10 gal., 15 gal., 30 gal., and 60 gal.
Stainless Steel Pressure Tanks are suitable for virtually all fluids and
solvents. They are ASME certified and permanently labeled for 110 PSIG
maximum working pressure. Tanks and lids are constructed of heavy gauge
304 stainless steel and are also electro polished. All models are
equipped with top outlet and bottom outlet plug, which can be adapted
for bottom outlet. Additionally, these tanks are fitted with 100%
stainless steel non-corrosive and non-corroding wetted parts.
Click here for more Sales Info
Click here for 2 Gal. Service Info
Click here for 5, 10, 15 Gal service Info
Click here for 30 Gal. Service Info
Binks Heavy Fluid Outfits for Water borne Materials
Description:
Binks 2 gallon pressure tank (zinc plated shell) with stainless steel lid and SS wetted parts. This outfit is for water borne fluids, and is ideal for all types of heavy viscosity materials such as latex, vinyls, epoxies gel coats, and adhesives applications. Outfit includes pressure tank with regulators and gauges, 2100 spray gun, 25 ft. each of air and fluid hose with connections, 15 ft. of air compressor hose with connections. Use the PT 78-K10 (10 pack) disposable liner for water borne compatibility.
Market:
- Adhesive
- General Industrial
- General Metal
- Leather
- Marine
- Miscellaneous
- Painter-Decorator-Contractor
- Wood (Cabinets)
- Wood (Furniture)
- Wood (Other)
Details:
Name: 98Z-358 Heavy Fluids Outfit for Water borne Materials
Part Number: 98Z-358
Gun: Model 2100
Pump: no pump
Tank: 83Z Series Model 220
Typical Application: 2 gallon outfit for heavy materials. Ideal for high volume adhesive applications. Use the PT 78-K10 (10 pack) disposable liner for water borne compataility.
Binks 2 Gal. Pressure Tank Outfit with Binks 2100 Internal Mix Spray Gun
Description:
Binks 2 gallon pressure tank outfit is ideal for all types of high volume Multi-color paint applications. 2 gallon pressure tank has a (zinc plated lid, tank shell and wetted parts). Outfit includes pressure tank with regulators and gauges, 2100 internal mix spray gun, 25 ft. each of air and fluid hose with connections, 15 ft. of air compressor hose with connections.
Markets:
- Construction
- General Industrial
- Miscellaneous
- Painter-Decorator-Contractor
- Wood (Furniture)
- Wood (Other)
Details:
Name: 98C-359 Multi-Color Outfit
Part Number: 98C-359
Gun: Model 2100
Pump: no pump
Tank: PT ASME Zinc Plated Lid/Shell
Typical Application: 2 gallon outfit for Multi-Color paints. Order the Binks PT 78-K10 (10 pack) disposable liner separately.
Number of Colors: Internal mix spray gun for Multi-Color paints
DeVilbiss Compact HVLP Gun w/2.8 Gal. Pressure Tank Part No: 98-3144
Description:
DeVilbiss Compact HVLP Spray Gun with a Binks 2.8 gal. 83C-220 Pressure Tank has zinc plated carbon steel shell and lid; carbon steel and brass wetted parts. Also includes pressure valves and hoses.
Details:
Name: Compact HVLP Gun w/2.8 Gal. Pressure Tank
Model: 98-3144
Gun: COM-PS507B-14-00
Tank: 83C-220 2.8 Gal. (zinc-plated)
Hoses: 71-1203 (15 ft.), 71-31101 (25 ft. Ergoflex air), 71-338 (25 ft. fluid)
Typical Applications: Stain Finishing, Sealer and Top Coat
Pressure Cups
SG-2 Plus Steadi-Grip 2 Quart Non-Agit Pressure Cup
Description:
Binks SG-2 Plus Steadi-Grip non-agitated 2 quart pressure cup is ideal for component spraying and small batch production. The Binks SG-2 is Lightweight, rugged and portable and also has a wide mouth cup opening making it easier for set-up.
Details:
Name: SG-2 Plus Steadi-Grip 2 Qt. Non-Agit Pressure Cup
Part Number: 80-600
Family: Pressure Cups
Type: SG-2 Steadi-Grip
Max Output Pressure: 50 psig (3.5 kg/cm2)
Wetted Materials: Aluminum, Stainless Steel
Air Inlet: 1/4" NPS(m), 0 to 10 psig (0-.7 bar)
Fluid In: 3/8" NPS(m)
Capacity: 2 Quart
Regulation: Yes
Agitator: None
Liners: 80-356 plastic liner (box of 12)
Weight: 4 lbs. 14oz. (2.2 kg.)
SG-2 Plus Steadi-Grip 2 Quart Agitated Pressure Cup
Description:
Binks SG-2 Plus Steadi-Grip paddle agitated (up and down) 2 quart pressure cup is ideal for component spraying and small batch production. The Binks SG-2 is lightweight, rugged and portable and also has a wide mouth cup opening for ease of use. This model is suitable for non-metallic coatings that require constant agitation, (For True metallic coatings, see Binks 80-651 prop agitated).
Details:
Name: SG-2 Plus Steadi-Grip 2 Qt. Agitated Pressure Cup
Part Number: 80-601
Family: Pressure Cups
Type: SG-2 Steadi-Grip
Max Output Pressure: 50 psig (3.5 kg/cm2)
Wetted Materials: Aluminum, Stainless Steel
Air Inlet: 1/4" NPS(m), 0 to 10 psig (0-.7 bar)
Fluid In: 3/8" NPS(m)
Capacity: 2 Quart
Regulation: Yes
Agitator: paddle agitator (up and down)
Liners: 80-356 plastic liner (box of 12)
Weight: 5 lbs. 7oz. (2.5 kg.)
Binks SG-2 Plus Steadi-Grip 2 Qt. Propeller Agitated (Rotary) 2 Quart Pressure Cup
Description:
Binks SG-2 Plus Steadi-Grip Propeller agitated (rotary) 2 quart pressure cup is ideal for component spraying and small batch production. Lightweight, rugged and portable. Wide mouth cup opening. The prop style non-magnetic agitator is ideal for metallic coatings that require constant agitation. Suitable for water borne and solvent borne materials.
Details:
Name: SG-2 Plus Steadi-Grip 2Qt. Prop Agitated Pressure Cup
Part Number: 80-651
Family: Pressure Cups
Type: SG-2 Steadi-Grip
Max Output Pressure: 50 psig (3.5 kg/cm2)
Wetted Materials: Aluminum, Stainless Steel
Air Inlet: 1/4" NPS(m), 0 to 10 psig (0-.7 bar)
Fluid In: 3/8" NPS(m)
Capacity: 2 Quart
Regulation: Air and fluid controls
Agitator: Propeller (rotary)
Liners: 80-356 plastic liner (box of 12)
Weight: 7 lbs. 5oz. (3.3 kg.)
DeVilbiss KB-545-SS Stainless Steel Pressure Feed Cup - 2 Qt.
The DeVilbiss KB II Series 2-quart cups feature a "pistol grip" carrying handle, and right- or left-handed design for comfort and ease of handling. An easy-open lid and wide cup mouth allow for fast filling and cleanup. KB II Series cups also feature a solvent-resistant check valve, a 0-30 psi air gauge, and a wide base for greater stability. KB II Cups are supplied with disposable cup liners, which reduce clean-up and solvent use. The unique lid liner also protects the underside of the lid, preventing check valve problems. Order KK-5051 disposable cup liner kit (20 each).
Details:
Name: KB II Stainless Steel Pressure Cup
Model: KB-545-SS
Style: pressure feed
Material: Stainless steel
Air Inlet: 1/4" NPS (M)
Capacity: 2 qt.
Fluid Connection: 3/8" NPS (M)
Cup Number: KB-442
Fluid Pressure: 2-30 psi
Ordering: Air/Fluid Hose: Order part KB-4006 for 6' hose lengths.
DeVilbiss KB-555 Aluminum Pressure Feed Cup
The DeVilbiss KB II Series 2-quart cups feature a "pistol grip" carrying handle, and right- or left-handed design for comfort and ease of handling. An easy-open lid and wide cup mouth allow for fast filling and cleanup. KB II Series cups also feature a solvent-resistant check valve, a 0-30 psi air gauge, and a wide base for greater stability. KB II Cups are supplied with disposable cup liners, which reduce clean-up and solvent use. The unique lid liner also protects the underside of the lid, preventing check valve problems. Order KK-5051 disposable cup liner kit (20 each).
Details:
Name: KB II Pressure Cup
Model: KB-555
Style: Pressure feed
Material: Aluminum
Air Inlet: 1/4" NPS (M)
Capacity: 2 qt.
Fluid Connection: 3/8" NPS (M)
Cup Number: KB-422
Fluid Pressure: 2-30 psi
Ordering: Air/Fluid Hose: Order part KB-4006 for 6' hose lengths.
DeVilbiss Compact Trans-Tech Gun w/Pressure Feed SG2 Plus 2-Qt Cup
Part #98-3143
Description:
The DeVilbiss Compact Trans-Tech (green) gun w/Pressure Feed SG2 Plus 2-qt.aluminum cup, liner, valve and hoses. This outfit is ideal to help wood finishing professionals to consistently achieve exceptionally efficient Stain Finishing, Sealer and Top Coat application results.
Tran-Tech (Green) = Maximum Efficiency with Environmental Responsibility. The DeVilbiss “Green” Compact gun utilizes the very latest advances in computational fluid dynamics.
Name: Compact Trans-Tech Gun (green) gun w/Pressure Feed SG2 Plus 2-Qt Cup
Model: 98-3143
Gun: COM-PS522G-14-00
Cup: SG2 Steadi-Grip 2-qt. Aluminum, 80-600
Valve: HAV-501
Hoses: Air and Fluid Hose, KB-4006, 5/16" ID x 6'
Typical Applications: Stain Finishing, Sealer and Top Coat
Siphon Cups
DeVilbiss TGC-545 Aluminum Siphon Cup 1 Quart
The DeVilbiss Aluminum siphon cups incorporate a two-position valve, which allows for operation as a "drip-free" cup or as a conventional suction feed cup. Smooth metal surfaces make cleanup and changeovers fast and easy. For use with all suction feed spray guns.
Details:
Name: TGC Suction Cup
Model: TGC-545
Style: Suction feed
Material: Aluminum
Capacity: 1 qt.
Fluid Connection: 3/8" NPS (F)
Cup Number: KR-428-2
DeVilbiss TGS-503 8 oz. Polyethylene Suction Cup
This 8 oz. cup combines an engineered resin lid with a translucent polyethylene cup that lets you see the liquid level. Lightweight and easy to clean, the non-staining cup has molded-in graduations for mixing ratios. Compatible with all solvents, it fits any suction feed gun with 1/4" NPS threads. Use an AD-404 adapter to adapt to spray guns with 3/8" NPS (M) inlets.
DeVilbiss TLC-576 1 Qt. Aluminum Low Pressure Cup
Aluminum 1-quart low pressure, PTFE-lined for fast, easy cleaning. Requires KK-4980 for cup air regulation (order separately).
Details:
Name: PTFE-Lined Pressure Cup
Model: TLC-576
Style: Pressure feed
Material: PTFE-lined aluminum
Capacity: 1 qt.
Fluid Connection: 3/8" NPS (F)
Cup Number: TLC-401
Ordering: Order KK-4980 Regulator Kit in addition to the cup.
DeVilbiss TSC-591 1 Qt. Stainless Steel Low Pressure Cup
The DeVilbiss TSC-591 is a high quality, stainless steel cup designed for use with corrosive type materials such as water bornes. It is also suitable for use with finishes containing halogenated hydrocarbon solvents. This cup requires a KK-4980 for cup air regulation (order separately.)
Details:
Name: Stainless Steel Pressure Cup
Model: TSC-591
Style: Pressure feed
Material: Stainless steel
Capacity: 1 qt.
Fluid Connection: 3/8" NPS (F)
Cup Number: TSC-400
Ordering: Order KK-4980 Regulator Kit in addition to the cup.
Binks 2100 Spray Gun and 1 Quart Drip-Free cup
This is outfit #98-2650, consisting of the Binks 2100 Spray Gun and the Binks 1 Quart Drip Proof Siphon Cup.
Details:
Name: Model 2100 Gun and 1 Qt. Drip-Free Siphon Cup
Part Number: 98-2650
Gun Category: Conventional
Gun Type: Manual
Fluid Passages: Stainless Steel
Fluid Inlets: 3/8" NPS (m)
Air Inlet: 1/4" NPS (m)
Weight: 28 oz.
Construction: Drop-Forged Aluminum
Colors: Blue
Cup: 81-800
Fluid Regulators
Pump Accessories
Binks Fluid Heater
Description:
Binks High pressure, lightweight, explosion proof. 5000psi capacity, Available in 3 voltages - 120 (16.6 AMPS), 240 (8.33 AMPS), 440 (4.5 AMPS), mounting bracket included.
Details:
Name: Binks Fluid Heater
Part Number: 830000, 01, 02
Family: Pump Accessories
Type: Heaters
Fluid Inlet: 1/2" NPT(F)
Fluid Outlet: 1/2" NPT(F)
Max Working Pressure: 5000 psi (340 bar), 2000 watts
Gauge Range: Adjustable thermostatic control from 60 to 250 degrees farenheit
Wetted Materials: Stainless Steel
Binks Gear Drive Agitator for 55 Gal. Drums
Description:
Binks Gear Drive agitator with complete support assembly. Available with four shaft couplers: 3/8" dia, 7/16", 1/2" and 5/8" square. Shipping
Details:
Name: Gear Drive Agitator for 55 Gal. Drums
Part Number: 31-394
Family: Pump Accessories
Type: Agitators
Regulated Air Pressure: 60 psig minimum
Max Working Pressure: 30 to 40 RPM maximum recommended
Horsepower: 1/2 hp air motor
Motor Drive Ratio: 15:1 gear-reduced drive (40 rpm)
Binks High Pressure Back Pressure Regulator
Description:
The Flow Pressure and Back Pressure Regulators allow complete control for viscous and heavy materials. They are suitable for solvent based and Water based mastics, sealers and waxes etc. ‘Wetted’ parts are manufactured from Stainless Steel, PTFE and Tungsten Carbide.
Details:
Name: High Pressure Back Pressure Regulator
Part Number: 107908
Family: Pump Accessories
Type: High Viscosity High Pressure Fluid Regulator
Inlet/Outlet Port: 3/4" NPT
Regulating Range: 500-3500 PSI
Maximum Inlet Pressure: 5100 PSI
Air Pilot Range: 10-80 PSI
Low Shear Back Pressure Regulator 3/4
Description:
Binks Low Shear Back Pressure Regulator 3/4 inch
Details:
Name: Low Shear Back Pressure Regulator 3/4"
Part Number: 107757-X-X, 107758-X-X
Family: Pump Accessories
Type: Fluid Regulator
Inlet/Outlet Fitting Selection Table
- Suffix
- Part Number
- Description
- Remarks
- R
- 192722
- Fitting - M28 x 3/4" Sanitary
- S
- 192723
- Fitting - M28 x 1" Sanitary
- Standard
- T
- 192724
- Fitting - M28 x 3/4" NPT(F)
- Standard
- U
- 192725
- Fitting - M28 x 3/4 BSPT (F)
- Standard
- V
- 192726
- Fitting - M28 x 28mm Compression Coupling
- W
- 192727
- Fitting - M28 x 3/4" BSP (H)
For more product details, please try our other Spray Finishing Supplies site here